How To Solve The Smoke Problem Of Dust Bag Filter
There are two types of “smoke and dust” at the air outlet of the bag filter. One is continuous “smoke and dust”, that is, because the dust filter bag is damaged and strained, the filter bag is not firmly tied off, or the height of the bag filter is not precise. Dust leakage caused by continuous imprecision between the hanging neck and the flower board, and between the flower board and the flower board. The other is the instant “smoke and dust”. In this case, although the dust filter bag is damaged, it is not very severe, and the instant “smoke and dust” occurs when the bag filter blows.
Because when a large area of the dust filter bag is damaged, the number of sweeps should be replaced. The dust bag is replaced when the dust collector is not working. At this time, the dust cleaning controller should be closed, and the manhole door at the top should be opened to remove the bag. When disassembling, first take out the bag cage, then pinch the spring ring on the top of the cloth bag into a concave shape, pull the dust removal cloth bag upward, and clean the dust on the hole of the flower plate before placing the new cloth bag.
When searching for the cause of the “smoke and dust” of the bag filter, you can check which digits are corresponding to the action of the electromagnetic pulse valve and the pulse controller when the air outlet is “smoke and dust” to check which dust filter bag is leaking.
The uncovered bag filter can also be used to detect the leaking filter bag from the investigation hole of the upper case with a flashlight; or turn on the pulse controller after turning on the uncovered cover, and find out which venturi tube is “flooding” during the blowing process. “Smoke” means that the dust filter bag leaks. Then, sanctions will be taken based on the problems(Problem Of Dust Bag Filter) that arise.
Because when a large area of the dust filter bag is damaged, the number of sweeps should be replaced. The dust bag is replaced when the dust collector is not working. At this time, the dust cleaning controller should be closed, and the manhole door at the top should be opened to remove the bag. When disassembling, first take out the bag cage, then pinch the spring ring on the top of the cloth bag into a concave shape, pull the dust removal cloth bag upward, and clean the dust on the hole of the flower plate before placing the new cloth bag.